Description
LENGTH: 5'11"
WIDTH: 19.38"
THICKNESS: 2.44"
VOLUME: 29.5L
FIN SYSTEM: FUTURES
FIN SETUP: THRUSTER
FINS INCLUDED: NO
CONDITION: This "used" Black Sheep Built "Stub Driver 3.0" from Lost Surfboards is basically a new surfboard. The board was probably only ridden a couple times and shows almost no evidence of being used. The deck and belly are about as perfect as a "used" surfboard gets, showing just the tiniest pressures on the deck and maybe 2-3 minute pressures on the belly. Tip to tail and rail to rail, this board is epic! A true 9.9 out of 10.0 stars!! Compare our price to any Black Sheep Built "Stub Driver 3.0" off the rack, and you'll see you're saving a boatload of $$$$. Still has that new-car smell and ready to wax and shred!!! :)
FROM LOST SURFBOARDS:
All new, every day, step-down, performance player, developed with Kolohe Andino. The 3.0_STUB is a direct derivative of the long time developed, but recently released, DRIVER3.0.
A board designed with elite level surfers, looking for the “Ultimate Driving Machine”. Primarily tested in and around the waves of the World Tour (not necessarily the typical 1′-3’ soft slop that most of us suffer through, daily) the DRIVER3.0 still left room at the lower end for higher performance in lesser waves.
Enter the 3.0STUB. A stepped-down and “stubbed”, low end/high performance, smaller wave-ripping machine.
Unlike the Sub-Driver (our other step-down performance boards), the 3.0_STUB does not use any vee in the tail. Instead it features a continuous rocker/concave combination. This is the primary difference between the two. While noticeably relaxed from DRIVER 3.0 rocker, it is still loose and lively, quick and easy to release, under the rear foot. Fitting more effortlessly into small pockets or quick dumpy sections than the SubDriver. Perfect for small beach break.
The similarities in rocker, bottom contours and outline, maintain a closer feel, when switching between the DRIVER3.0 and 3.0STUB. That was the goal and that is the result.
FEATURES: …When compared to the DRIVER3.0
Relaxed entry rocker, with a slightly wider nose area.
Relaxed tail rocker, with a slight hip and wider tail block (but not as wide as the SubDrivers.)
More width overall, with thickness carried further into the nose and under the rear foot.
Deeper single and double concave combination, for more lift, with plenty or rail curve, in lesser surf.
Slightly flatter deck, with soft , forgiving rails.
Working with Kolohe, who after riding DRIVER3.0 in proper surf, wanted to feel like he was riding the same board, out at T-Street, or small Trestles. Riding SubDrivers “felt almost stiff”. He wanted board that required no adjustment to technique and coupld swap seamlessly back and forth with the DRIVER3.0.
“Why not just make a step-down board off of that?”
Which is exactly what we did. We got them under the feet of our WQS crew: Crosby Cola, Cole Houshmand, Eli Hanniman and Michael Dunphy, who immediately responded with positive feedback and now carry in their small wave, Challenger series, arsenal.
