Description
LENGTH: 6'5"
WIDTH: 20 5/8"
THICKNESS: 2 5/8"
VOLUME: 37L
FIN SYSTEM: FUTURES + SINGLE
FIN SETUP: 2 + 1
FINS INCLUDED: NO
This 6'5" midlength by Hasbrook Surfcraft is a great daily driver for those looking to find something between a shortboard and a midlength. Easy to paddle and catch waves, and still performancy enough to have a blast on, or style out and glide. It's right in the middle as far as size, length, rocker, performance, volume, etc. Great for knee high beachbreak to well-overhead pointbreaks, and everything in between.
Condition: This midlength egg by Hasbrook Surfcraft is in excellent condition! The deck has medium pressure wear with a pressure dent near the upper right of the nose, but nothing crazy deep, looks to have been a slight bounce of the knee. The bottom is very clean, having very lite pressure/wear. There is a slight remenant of a sticker, just above the logo, but again, nothing crazy. There was an area on the rail where our Stray Boards repair crew resealed to ensure it is water tight. This board is watertight, fresh, and lots of sparky life, ready to shred and glide in style!
From Hasbrook SurfCraft: "The Crazy Pill"
Crazy Pill
A performance egg:
Outline: A full round nose with a rounded pin/thumb tail, for a grovely feel, very responsive performance and a stable ride. In epoxy, this can feel like a skateboard, even though it’s 6’10”, allowing confidence to take over, knowing you can really go for it, and that the board will have your back when things get sketchy. Looking to cruise, snap, air, and an absolute barrel deamon.
Rocker: The nose has a subtle noserocker, (no nose kick) to a normal deck, into a gradual tail kick. Very pivoty off the back foot, with smooth zippy turns in the pocket, or rounded out & stylish carves on the face.
Rails: Hard performance rails in the back 1/2 of the board, which gradually softens/rounds out as you approach the nose, for a more classic and traditional feel and ride. Also helps with not catching your rails in critical situations.
Carbon Fiber: Reinforced with a 3” Carbon Fiber strip down the deck, bottom, and rails in the tail for strength, aesthetics, and flexing regions of the board.
