Description
LENGTH: 7'0"
WIDTH: 21"
THICKNESS: 2 5/8"
VOLUME: 46.7L
FIN SYSTEM: FUTURES
FIN SETUP: 4 + 1
FINS INCLUDED: NO
This 7'0" Walden "Deviled Egg" surfboard is in Like-New condition!! It is a SurfTech, which is very VERY tough! This funboard in particular comes in the eco-friendly Madera construction, mimicking a wood look. This midlength is described as a swiss army knife shape, kind of a 1-board, do it all, surfboard - a great daily driver for most all conditions. A 1-board quiver if you will! Read more about this Walden surfboard below the condition, below!
Condition: The deck has practically no wear, the most minimal pressures if you can spot them in the right angle and lighting, otherwise the board looks like-new! The bottom is flawless wesides on nickle sized area where we resealed a slight scuff to the exterior topcoat to ensure it is watertight.
From Walden Surfboards: "The Deviled Egg" In SurfTech & Madera Construction (Wood-Look/Eco Friendly)
When designing the Deviled Egg, Steve’s goal was tocreate the ultimate one-board quiver—a versatile SwissArmy Knife-type shape that could handle a wide range ofwave conditions from waist-high to overhead and would serveas the ultimate travel board. Reaching back into his archives,Steve started with a classic mid-length egg outline and addedhis trademark Magic Model concave bottom and hard rails. Theresult is a morphed board that combines Steve’s traditionalroots and experimental design philosophy. A pulled-in nose,rounded pin tail, and longdrawn-out curve through themiddle of the board’s outline are a few of the features thatmake the Deviled Egg a highly maneuverable yetsmoothriding hybrid. The Deviled Egg also has plenty of volume toget into waves early, plus just enough rocker and nose kickto handle steeper drops. We’ve combined the Deviled Eggwith Surftech’s Madera construction for a an eco friendly vibe.For riders who want dependability and are looking to blurthe lines between shortboarding and longboarding look no further than the Deviled Egg.
More about Madera Construction:
Albert Einstein once said, “Look deep into nature, and then you will understand everything better.” Taking old Albert’s advice we looked to the natural world for inspiration when creating our new Madera construction. While identifying materials that we could sustainably harvest was a priority, we were not willing to sacrifice either performance or durability. Known for its brawn and as the main material used in the first surfboards, wood was an obvious choice. Our Madera collection uses a variety of sustainably harvested timber chosen for its strength to weight ratio, not to mention its aesthetic beauty, to create a durable outer shell around a super light EPS core. The board is then encapsulated in an epoxy resin to create a watertight seal and further add rigidity. Our first test riders were blown away by the performance and, even though you could ding one if you really tried, we have not had a test board come back dinged or broken. If you are looking for a board that performs, is durable, and uses sustainably sourced materials the Madera collection is for you.
FUSED CELL EPS CORE // Closed-cell EPS core provides more response + flotation
CLEAR HD-EPOXY RESIN // Epoxy resin system with high thermo-mechanical performances
HIGH QUALITY E-GLASS FIBERGLASS // E-glass has the highest strength-to-weight ratio available
BAMBOO ECO-SKIN // Sustainable harvested durable outer layer protects against dings
and dampens chatter.
